Washtech M2 – Professional Passthrough

Washtech M2 – Professional Passthrough Dishwasher

Features:
Autostart on door closure 1, 2 and 3-minute cycles
Up to 1080 plates per hour
QuikConnect Installation with everything you need including:
– Water supply hose
– Dual detergent and rinse aid pumps with injector lines
– Drain pump outlet hose
– Unique 595mm to 640mm bench gap compatibility
– 15 amp plug set
– No commissioning required
Reliable results through upper and lower wash and rinse arms with precision moulded jets
Durable stainless steel construction
Low cold water consumption of 2.4 litres per cycle
Assured final rinse ensures the correct temperature and pressures everytime through it’s rinse pump and 316 stainless break tank
Soft start ensures great results through progressively pressurising the cycle to provide a consistent and even clean every time
EcoPower reduces temperatures and energy consumption when the machine is not being used
Reliable double filtration system via scrap trays and separate wash inlet filter

Unit Includes:
2 x 500mm dish rack
1 x 500mm cup rack
2 x cutlery container

Specifications:
Width: 705mm
Depth: 720mm
Height: 1530mm
Weight: 94kg
Power: Single phase 240V 50Hz 15A or Three phase 415V 50Hz 15A/phase
Max Power Consumption: Single phase 3.7kW or Three phase 9.0kW
Heating: Wash 2.5kW – Rinse 3.0 or 6.0kW

Hot Water:
Temperature: 65°C
Connection: 3/4” male hose supplied
Pressure: 200-350kPa
Flow: 15 litres per min
Quality: Potable & soft
Backflow: Prevention Dual Check Valve (DCV)
Consumption: 2.4 litres per cycle